WORLDWIDE
Thermally Conductive Compounds
| Specification ThermPass 1101 is polypropylene-based, thermally conducting, electrically insulating and flame-retardant injection grade. ThermPass 1101 is a non-halogenated, non-phosphate thermally conductive compound for LED heat sink (Plastic Heat Sink) application.ThermPass 1101 is in compliance with IEC 62560, IEC 60695 and IEC 60968. Features 1. Good termal conductivity 2. UL94 1.5mm V-0 3. Good processability for injection molding 4. Design freedom |
 |
| PROPERTIES | STANDARD |
VALUE |
UNIT |
| PHYSICAL | |||
| Color | grey |
||
| Melt Flow Rate, 200°C/10 kg | ASTM D1238 |
7.6 |
g/10min |
| Elongation at break (MD/TD) | ASTM D792 |
2.0 |
g/cm3 |
| MECHANICAL | |||
| Tensile Strength, 50 mm/min | ASTM D638 |
150 |
Kg/cm2 |
| Flexural Strength | ASTM D790 |
130 |
Kg/cm2 |
| Flexural Modulus | ASTM D790 |
40000 |
Kg/cm2 |
| Impact Strength, 1/8" Notched | ASTM D256 |
15 |
J/m |
| THERMAL | |||
| Thermal conductivity | ISO 22007-2 |
3.0 |
W/m-K |
| HDT, 0.45 MPa, unannealed | ASTM D648 |
110 |
oC |
| ELECTRICAL | |||
| Surface resistivity | ASTM D257 |
>1E+12 |
Ohm/sq |
| Mold shrinkage | ASTM D955 |
0.001-0.003 |
cm/cm |
| FLAME CHARACTERISTICS | |||
| UL94 V-0 Flammability Rating | pass |
2.0 |
mm |
| Processing parameters | VALUE |
UNIT |
| Pre-drying condition | ||
| Drying Temperature | 80 - 100 |
oC |
| Drying Time | 2 - 4 |
hours |
| Injection molding condition | ||
| Injection Temperature | 180 - 200 |
oC |
| Injection Pressure | Medium |
|
| Injection Speed | Medium - Fast |
|
| Mold Temperature | 50 |
oC |
| Specification ThermPass 1201 is polypropylene-based, thermally conducting, electrically insulating and flame-retardant injection grade. ThermPass 1201 is a non-halogenated, non-phosphate thermally conductive compound for LED heat sink (Insulation Heat Sink) application.ThermPass 1201 is in compliance with IEC 62560, IEC 60695 and IEC 60968. Features 1. Good termal conductivity 2. UL94 1.5mm V-0 3. Good processability for injection molding 4. Design freedom & stylish colors |
|
| PROPERTIES | STANDARD |
VALUE |
UNIT |
| PHYSICAL | |||
| Color | white and colored |
||
| Melt Flow Rate, 200°C/10 kg | ASTM D1238 |
4 |
g/10min |
| Elongation at break (MD/TD) | ASTM D792 |
2.4 |
g/cm3 |
| MECHANICAL | |||
| Tensile Strength, 50 mm/min | ASTM D638 |
140 |
Kg/cm2 |
| Flexural Strength | ASTM D790 |
315 |
Kg/cm2 |
| Flexural Modulus | ASTM D790 |
73300 |
Kg/cm2 |
| Impact Strength, 1/8" Notched | ASTM D256 |
20 |
J/m |
| THERMAL | |||
| Thermal conductivity | ISO 22007-2 |
2.0 |
W/m-K |
| HDT, 0.45 MPa, unannealed | ASTM D648 |
130 |
oC |
| ELECTRICAL | |||
| Surface resistivity | ASTM D257 |
>1E+12 |
Ohm/sq |
| Mold shrinkage | ASTM D955 |
0.006 |
cm/cm |
| FLAME CHARACTERISTICS | |||
| UL94 V-0 Flammability Rating | pass |
1.5 |
mm |
| Processing parameters | VALUE |
UNIT |
| Pre-drying condition | ||
| Drying Temperature | 80 - 100 |
oC |
| Drying Time | 2 - 4 |
hours |
| Injection molding condition | ||
| Injection Temperature | 190 - 210 |
oC |
| Injection Pressure | Medium |
|
| Injection Speed | Medium - Fast |
|
| Mold Temperature | 50 |
oC |
| Specification ThermPass 1203 is polypropylene-based, thermally conducting, electrically insulating and flame-retardant injection grade. ThermPass 1203 is a non-halogenated, non-phosphate thermally conductive compound for LED heat sink (Plastic Heat Sink , Insulation Heat Sink) application.ThermPass 1203 is in compliance with IEC 62560, IEC 60695 and IEC 60968. Features 1. Good thermal conductivity 2. UL94 1.5mm V-0 3. Good processability for injection molding 4. Design freedom & stylish colors |
|
| PROPERTIES | STANDARD |
VALUE |
UNIT |
| PHYSICAL | |||
| Color | white and colored |
||
| Melt Flow Rate, 200°C/10 kg | ASTM D1238 |
11 |
g/10min |
| Elongation at break (MD/TD) | ASTM D792 |
2.2 |
g/cm3 |
| MECHANICAL | |||
| Tensile Strength, 50 mm/min | ASTM D638 |
180 |
Kg/cm2 |
| Flexural Strength | ASTM D790 |
300 |
Kg/cm2 |
| Flexural Modulus | ASTM D790 |
63000 |
Kg/cm2 |
| Impact Strength, 1/8" Notched | ASTM D256 |
20 |
J/m |
| THERMAL | |||
| Thermal conductivity | ISO 22007-2 |
1.5 |
W/m-K |
| HDT, 0.45 MPa, unannealed | ASTM D648 |
130 |
oC |
| ELECTRICAL | |||
| Surface resistivity | ASTM D257 |
>1E+12 |
Ohm/sq |
| Mold shrinkage | ASTM D955 |
0.006 |
cm/cm |
| FLAME CHARACTERISTICS | |||
| UL94 V-0 Flammability Rating | pass |
1.5 |
mm |
| Processing parameters | VALUE |
UNIT |
| Pre-drying condition | ||
| Drying Temperature | 80 - 100 |
oC |
| Drying Time | 2 - 4 |
hours |
| Injection molding condition | ||
| Injection Temperature | 190-210 |
oC |
| Injection Pressure | Medium |
|
| Injection Speed | Medium - Fast |
|
| Mold Temperature | 50 |
oC |
| Specification ThermPass 5702 is thermoplastic elastomer based compound with excellent thermal conductivity. ThermPass 5702 is electrically insulative and available in injection molding grade, applicable as gap filler in electronic devices to enhance heat dissipation. Features 1. Good thermal conductivity 2. Good processability for injection molding 3. Design freedom & stylish colors |
|
| PROPERTIES |
STANDARD
|
VALUE
|
UNIT
|
| PHYSICAL | |||
| Color |
|
White
|
|
| Melt Flow Rate, 200°C/5 kg |
ASTM D1238
|
12.0
|
g/10min
|
| Density |
ASTM D792
|
1.9
|
g/cm3
|
| Hardness | ASTM D2240 | 80 | Shore A |
|
|
|||
| MECHANICAL | |||
| Tensile Strength, 50 mm/min |
ASTM D638
|
4.0
|
MPa
|
| Tensile Modulus |
ASTM D638
|
105
|
MPa
|
| Yield Strength |
ASTM D638
|
2.7
|
MPa
|
| Elongation at Break |
ASTM D638
|
190
|
%
|
|
|
|||
| THERMAL | |||
| Thermal conductivity |
ISO 22007-2
|
1.3
|
W/m-K
|
|
|
|||
| ELECTRICAL | |||
| Surface resistivity |
ASTM D257
|
>1E+12
|
Ohm/sq
|
|
|
|||
| FLAMMABILITY | |||
| UL94 V-0 Flammability rating |
Pass(equivalent)
|
3.0
|
mm
|
|
PROCESSING PARAMETERS |
VALUE
|
UNIT
|
| Pre-drying condition | ||
| Drying temperature |
80 - 100
|
oC
|
| Drying time |
2 - 4
|
hours
|
|
|
||
| Injection molding condition | ||
| Injection temperature |
190 - 210
|
oC
|
| Injection pressure |
medium
|
|
| Injection speed |
medium - fast
|
|
| Mold temperature |
50
|
oC
|
