WORLDWIDE
Thermally Conductive Compounds
- Item No. : ThermPass 1201
- Porduct Name : Thermally Conductive compound
We are professional manufacturer of Thermally Conductive Compound, such as Thermally Conductive Plastics.
ThermPass 1201 is polypropylene-based, thermally conducting, electrically insulating and flame-retardant injection grade. ThermPass 1201 is a non-halogenated, non-phosphate thermally conductive compound for LED heat sink (Plastic Heat Sink , Insulation Heat Sink) application.ThermPass 1201 is in compliance with IEC 62560, IEC 60695 and IEC 60968.
ThermPass 1201 is polypropylene-based, thermally conducting, electrically insulating and flame-retardant injection grade. ThermPass 1201 is a non-halogenated, non-phosphate thermally conductive compound for LED heat sink (Plastic Heat Sink , Insulation Heat Sink) application.ThermPass 1201 is in compliance with IEC 62560, IEC 60695 and IEC 60968.
Feature :
1. Good termal conductivity
2. UL94 1.5mm V-0
3. Good processability for injection molding
4. Design freedom & stylish colors
2. UL94 1.5mm V-0
3. Good processability for injection molding
4. Design freedom & stylish colors
Application :
Plastic Heat Sink , Insulation Heat Sink
Specification :
PROPERTIES | STANDARD |
VALUE |
UNIT |
PHYSICAL | |||
Color | white and colored |
||
Melt Flow Rate, 200°C/10 kg | ASTM D1238 |
4 |
g/10min |
Elongation at break (MD/TD) | ASTM D792 |
2.4 |
g/cm3 |
MECHANICAL | |||
Tensile Strength, 50 mm/min | ASTM D638 |
140 |
Kg/cm2 |
Flexural Strength | ASTM D790 |
315 |
Kg/cm2 |
Flexural Modulus | ASTM D790 |
73300 |
Kg/cm2 |
Impact Strength, 1/8" Notched | ASTM D256 |
20 |
J/m |
THERMAL | |||
Thermal conductivity | ISO 22007-2 |
2.0 |
W/m-K |
HDT, 0.45 MPa, unannealed | ASTM D648 |
130 |
oC |
ELECTRICAL | |||
Surface resistivity | ASTM D257 |
>1E+12 |
Ohm/sq |
Mold shrinkage | ASTM D955 |
0.006 |
cm/cm |
FLAME CHARACTERISTICS | |||
UL94 V-0 Flammability Rating | pass |
1.5 |
mm |
Processing parameters | VALUE |
UNIT |
Pre-drying condition | ||
Drying Temperature | 80 - 100 |
oC |
Drying Time | 2 - 4 |
hours |
Injection molding condition | ||
Injection Temperature | 190 - 210 |
oC |
Injection Pressure | Medium |
|
Injection Speed | Medium - Fast |
|
Mold Temperature | 50 |
oC |